Overheating – Radiator Cap
The bike temperature was 109 degrees Celsius. We were out in Salt Lake City Utah, at over 4,000 feet of elevation in the middle of the dusty desert when the […]
Keeping Electrical Connectors Tidy
You’re working on your bike, you’ve pulled your gas tank off, removed your airbox, and taken off your throttle bodies. You’ve cleaned them all and now you’re ready to put […]
6 Parts from Novice School to the Races
This week’s #TechTalk is all about the 6 building blocks of a good racebike. With just these modifications from your stock bike or a used bike you bought online, you […]
Easier Rear Wheel Changes
This week’s #TuesdayTechTalk is all about making your rear wheel changes easier..With all I’ve been able to learn over the years I’ve come to understand that there are 6 basic areas to […]
Preventative Maintenance
Tuesday Tech Talk – Doubt This week’s Tuesday #TechTip is all about preventative maintenance. More specifically, doubt. Keep an eye out! –#Indy#NL52#CycleGear
Bolt and Tool Trays – Baking Sheets
These are the exact trays that we use. We use the bare aluminum, not non-stick, just in case the material was to come off and contaminate materials. #1 Most Used […]
Torque Wrenches
3/8 Torque Wrench Amazon – https://amzn.to/2oga11K 1/4 Torque Wrench Amazon – https://amzn.to/2oblrnG What is the worst thing you’ve seen from a bolt not being torqued properly? Handlebar come loose? Fork […]
Acid Brushes – Grease
The best thing I found that you can use to apply grease or anti-seize with is a paintbrush. I personally use Acid Brushes from Harbor Freight and they are great […]
Nolan Lamkin 52 Maintenance
This is everything that I do on the motorcycle between rounds. Save, mounting new bodywork, or changing the clutch (one-off things). I hope to use this as an opportunity for […]